The P2750: Intermediate Shaft Speed Sensor C Circuit Range/Performance code indicates that the performance of intermediate shaft speed sensor ‘C’ is out of the expected range. This may result from a faulty sensor, issues with the wiring or connectors, or a malfunction in the control module. This sensor plays a critical role in monitoring the speed of the transmission’s intermediate shaft, and any discrepancy can affect the transmission’s ability to shift gears properly.
P2750 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2750: Intermediate Shaft Speed Sensor C Circuit Range/Performance |
| Is it serious? | Yes, this code can lead to improper transmission shifting, erratic performance, and potentially cause further transmission issues if not addressed. |
| Possible causes | – Out-of-range performance of intermediate shaft speed sensor C – Faulty sensor or control module – Wiring or connector issues |
| How to diagnose? | – Check the performance of intermediate shaft speed sensor C – Inspect wiring and connectors – Verify control module functionality – Replace faulty components as needed |
P2750 Meaning
The P2750: Intermediate Shaft Speed Sensor C Circuit Range/Performance code suggests that the signal from the intermediate shaft speed sensor ‘C’ is out of the acceptable range. This could be due to a malfunctioning sensor, wiring issues like open circuits or poor connections, or control module faults. This improper performance can prevent the transmission control module from receiving accurate shaft speed information, leading to erratic or delayed shifting behavior.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to identify any other related codes that might indicate additional problems affecting sensor ‘C’. These codes can help pinpoint specific areas of concern. | OBD-II Scanner |
| Check Performance of Intermediate Shaft Speed Sensor C | Use a diagnostic tool or multimeter to measure the sensor’s output. Compare the readings to the manufacturer’s specifications to see if they are within the expected range. | Multimeter, Diagnostic Tool, Manufacturer Specifications |
| Inspect Wiring and Connectors | Perform a thorough visual inspection of the wiring and connectors associated with sensor ‘C’. Look for loose connections, corrosion, damaged wires, or other signs of wear that could impact the signal quality. | Flashlight, Multimeter |
| Test the Sensor for Stability | Use a multimeter to test the stability of the sensor’s resistance. Any erratic or out-of-spec readings could indicate an internal fault in the sensor itself. | Multimeter |
| Verify Control Module Functionality | Use a diagnostic tool to ensure that the transmission control module is properly interpreting the signals from sensor ‘C’. A faulty control module might misinterpret a properly functioning sensor’s data as being out of range. | Diagnostic Tool, Manufacturer Software |
| Replace Faulty Components as Needed | If any components, such as the sensor, connectors, or wiring, are found to be faulty, replace them as needed. If the control module is determined to be the issue, repair or replacement will be required. | Replacement Sensor, Wiring Repair Kit |
| Clear the Code and Test Drive | After completing the necessary repairs, use an OBD-II scanner to clear the P2750 code. Conduct a test drive to verify that the sensor now provides readings within the expected range and that the transmission shifts smoothly. | OBD-II Scanner |
| Recheck for Codes | After the test drive, perform a final scan to confirm that the P2750 code has not returned. If the code reappears, additional diagnostic procedures will be required. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)