The P2751: Intermediate Shaft Speed Sensor C Circuit No Signal code indicates that no signal is being received from the intermediate shaft speed sensor ‘C’. This problem could be due to a faulty sensor, damaged or disconnected wiring, or an issue with the control module. The sensor is crucial for determining the speed of the intermediate shaft, and a lack of signal can disrupt the transmission’s ability to operate effectively.
P2751 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2751: Intermediate Shaft Speed Sensor C Circuit No Signal |
| Is it serious? | Yes, this issue can lead to improper or no transmission shifting, affecting drivability and possibly leading to severe transmission damage if not resolved. |
| Possible causes | – No signal from intermediate shaft speed sensor C – Faulty sensor or wiring – Control module issues |
| How to diagnose? | – Check for signal from intermediate shaft speed sensor C – Inspect wiring and connectors – Verify control module functionality – Replace faulty sensor or components as needed |
P2751 Meaning
The P2751: Intermediate Shaft Speed Sensor C Circuit No Signal code indicates that the transmission control module is not receiving any signal from intermediate shaft speed sensor ‘C’. This can occur due to sensor failure, broken or disconnected wiring, or problems with the control module itself. If no signal is being sent, the transmission cannot properly determine the intermediate shaft speed, which may lead to erratic shifting or complete transmission failure.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to determine if any additional related codes are present. Other codes might help identify issues that are contributing to the lack of signal. | OBD-II Scanner |
| Check for Signal from Intermediate Shaft Speed Sensor C | Use an oscilloscope or diagnostic tool to check if there is an active signal coming from speed sensor ‘C’. If no signal is present, the sensor may be faulty. | Oscilloscope, Diagnostic Tool |
| Inspect Wiring and Connectors | Perform a visual inspection of the wiring and connectors leading to sensor ‘C’. Look for loose connections, damaged wires, or corrosion that might be interrupting the circuit. | Flashlight, Safety Gloves |
| Test Intermediate Shaft Speed Sensor C | Use a multimeter to measure the resistance of sensor ‘C’. Compare this resistance with manufacturer specifications. If the readings are not within the specified range or if there is no continuity, the sensor may need replacement. | Multimeter, Manufacturer Specifications |
| Verify Control Module Functionality | Check the control module using a diagnostic tool to ensure it is properly processing inputs from speed sensor ‘C’. If the control module does not detect a signal when one should be present, the module may be malfunctioning. | Diagnostic Tool, Manufacturer Software |
| Replace Faulty Sensor or Components as Needed | Replace any faulty components such as the sensor, wiring, or connectors. If the control module is the problem, it may need repair or replacement. Ensure all connections are tight and secure. | Replacement Sensor, Wiring Repair Kit |
| Clear the Code and Test Drive | After making the necessary repairs, use an OBD-II scanner to clear the P2751 code. Take the vehicle for a test drive to verify that the transmission now has proper speed input from sensor ‘C’ and that it shifts smoothly. | OBD-II Scanner |
| Recheck for Codes | Perform a final scan after the test drive to ensure that the P2751 code has not returned. If it does, further diagnostics will be required to determine the source of the ongoing issue. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)