The P2747: Intermediate Shaft Speed Sensor B Circuit No Signal indicates that there is no signal being received from the intermediate shaft speed sensor ‘B’. This can result from a faulty sensor, damaged wiring, or issues with the control module. The intermediate shaft speed sensor ‘B’ is crucial for monitoring the transmission’s intermediate shaft speed, and a lack of signal will hinder the transmission’s ability to shift effectively.
P2747 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2747: Intermediate Shaft Speed Sensor B Circuit No Signal |
| Is it serious? | Yes, this code can cause improper transmission shifting, leading to drivability problems and potentially damaging the transmission if not fixed promptly. |
| Possible causes | – No signal from intermediate shaft speed sensor B – Faulty sensor or wiring – Control module issues |
| How to diagnose? | – Check for a signal from intermediate shaft speed sensor B – Inspect wiring and connectors – Verify control module functionality – Replace faulty sensor or components as needed |
P2747 Meaning
The P2747: Intermediate Shaft Speed Sensor B Circuit No Signal code means that no signal is being received from the intermediate shaft speed sensor ‘B’. This may indicate a failed sensor, broken wiring, poor connections, or a malfunction in the control module. Without a proper signal, the transmission control module cannot effectively regulate the transmission’s operation, leading to shifting issues.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for any additional codes related to the transmission or speed sensors. Other codes might help provide more insight into why no signal is being received. | OBD-II Scanner |
| Check for Signal from Intermediate Shaft Speed Sensor B | Use an oscilloscope or diagnostic tool to check for an active signal from speed sensor ‘B’. If no signal is detected, it indicates that the sensor is either not functioning or there is a problem with the circuit. | Oscilloscope, Diagnostic Tool |
| Inspect Wiring and Connectors | Inspect all wiring and connectors associated with the sensor for signs of wear, damage, or disconnections. A loose connection or broken wire can prevent the sensor from sending a signal. | Flashlight, Multimeter |
| Test Intermediate Shaft Speed Sensor B | Use a multimeter to test the resistance of the speed sensor. Compare it with the manufacturer’s specifications to determine if the sensor is functional. If resistance is out of spec or there is no continuity, the sensor is likely faulty. | Multimeter |
| Verify Control Module Functionality | Verify that the transmission control module is properly receiving input from the sensor. A malfunction in the control module could also prevent the reception of signals from the sensor. | Diagnostic Tool, Manufacturer Software |
| Replace Faulty Sensor or Components as Needed | Replace any faulty components, such as the intermediate shaft speed sensor, wiring, or connectors. If the control module is faulty, repair or replace it as needed. | Replacement Sensor, Wiring Repair Kit |
| Clear the Code and Test Drive | After making the necessary repairs, use an OBD-II scanner to clear the P2747 code. Conduct a test drive to verify that the sensor is sending a proper signal and that the transmission is shifting smoothly. | OBD-II Scanner |
| Recheck for Codes | Perform a final scan after the test drive to confirm that the P2747 code has not returned. If the code persists, additional diagnosis may be required to identify and resolve the issue. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)