The P3472: Cylinder 9 Exhaust Valve Control Circuit High refers to a high voltage condition in the exhaust valve control circuit for Cylinder 9. This issue can be caused by faulty wiring, poor electrical connections, or a malfunctioning control solenoid. The exhaust valve control system manages the flow of exhaust gases from Cylinder 9, and high voltage in the circuit can prevent the valve from functioning properly, leading to engine performance issues.
P3472 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P3472: Cylinder 9 Exhaust Valve Control Circuit High |
| Is it serious? | Yes, this can result in engine misfires, poor idling, and reduced fuel efficiency. |
| Possible causes | – High voltage in the exhaust valve control circuit for Cylinder 9 – Faulty wiring or connections – Malfunctioning control solenoid |
| How to diagnose? | – Check the voltage levels in the exhaust valve control circuit for Cylinder 9 – Inspect wiring and connections for faults – Test the control solenoid for proper operation |
P3472 Meaning
The P3472: Cylinder 9 Exhaust Valve Control Circuit High code indicates that the voltage in the exhaust valve control circuit for Cylinder 9 is higher than expected. This can be caused by damaged wiring, poor connections, or a faulty exhaust valve control solenoid. High voltage in this circuit can disrupt the proper operation of the exhaust valve, leading to engine misfires, rough idling, and decreased fuel efficiency.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional related codes that might provide more insight into Cylinder 9’s exhaust valve control circuit issues. | OBD-II Scanner |
| Check Voltage Levels | Use a multimeter to measure the voltage levels in the exhaust valve control circuit for Cylinder 9. Compare the readings with manufacturer specifications to confirm high voltage. | Multimeter, Diagnostic Tool |
| Inspect Wiring and Connections | Visually inspect the wiring and connections for Cylinder 9’s exhaust valve control circuit. Look for damaged, corroded, or loose connections and repair or replace as necessary. | Flashlight, Multimeter |
| Test Control Solenoid | Test the exhaust valve control solenoid for Cylinder 9 to ensure it is functioning properly. Measure its resistance and verify its operation based on manufacturer specifications. Replace if necessary. | Multimeter, Mechanic Tools |
| Repair or Replace Faulty Components | Repair or replace any faulty wiring, connectors, or solenoids identified during diagnostics. Ensure proper installation and functionality after repair. | Mechanic Tools |
| Clear the Code and Test Drive | After repairs, clear the fault code using an OBD-II scanner. Take the vehicle for a test drive to ensure the exhaust valve control system for Cylinder 9 is functioning correctly. | OBD-II Scanner, Vehicle |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure the P3472 code does not return. If the code reappears, further diagnostics may be required. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
