The P3436: Cylinder 5 Deactivation/Intake Valve Control Circuit High refers to a high voltage condition in the intake valve control circuit for Cylinder 5. This can be caused by faulty wiring, poor electrical connections, or a malfunctioning control solenoid. The intake valve control system regulates the flow of air into Cylinder 5, and high voltage can disrupt its operation, leading to engine performance issues.
P3436 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P3436: Cylinder 5 Deactivation/Intake Valve Control Circuit High |
| Is it serious? | Yes, this can cause misfires, rough idling, and reduced fuel efficiency. |
| Possible causes | – High voltage in the intake valve control circuit for Cylinder 5 – Faulty wiring or connections – Malfunctioning control solenoid |
| How to diagnose? | – Check the voltage levels in the intake valve control circuit for Cylinder 5 – Inspect wiring and connections for faults – Test the control solenoid for proper operation |
P3436 Meaning
The P3436: Cylinder 5 Deactivation/Intake Valve Control Circuit High code indicates that the voltage in the intake valve control circuit for Cylinder 5 is higher than expected. This may result from damaged wiring, poor electrical connections, or a malfunctioning intake valve control solenoid. High voltage in this circuit can cause improper valve function, leading to engine misfires, rough idling, and reduced fuel efficiency.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for any additional related codes that may provide more information about the intake valve control system for Cylinder 5. | OBD-II Scanner |
| Check Voltage Levels | Use a multimeter to measure the voltage levels in the intake valve control circuit for Cylinder 5. Compare the readings with manufacturer specifications to confirm high voltage. | Multimeter, Diagnostic Tool |
| Inspect Wiring and Connections | Visually inspect the wiring and connections for Cylinder 5’s intake valve control circuit. Look for damaged, loose, or corroded wiring and connectors, and repair or replace as necessary. | Flashlight, Multimeter |
| Test Control Solenoid | Test the intake valve control solenoid for Cylinder 5 to ensure it is functioning properly. Measure its resistance and check against manufacturer specifications. Replace if necessary. | Multimeter, Mechanic Tools |
| Repair or Replace Faulty Components | Repair or replace any faulty wiring, connectors, or solenoids identified during diagnostics. Ensure all parts are installed correctly and functioning properly after replacement. | Mechanic Tools |
| Clear the Code and Test Drive | After repairs, clear the fault code using an OBD-II scanner. Take the vehicle for a test drive to ensure the intake valve control system for Cylinder 5 is operating correctly. | OBD-II Scanner, Vehicle |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure that the P3436 code does not return. If the code reappears, further diagnostics may be necessary. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
