The P2769: Torque Converter Clutch Circuit Low code indicates that there is a low voltage condition in the torque converter clutch (TCC) circuit. This could be caused by faulty wiring, a failing torque converter clutch solenoid, or issues with the control module. Proper voltage in the TCC circuit is crucial to ensure the torque converter locks up effectively, optimizing fuel efficiency and transmission performance.
P2769 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2769: Torque Converter Clutch Circuit Low |
| Is it serious? | Yes, low voltage can lead to improper operation of the TCC, causing slipping, increased transmission temperatures, reduced fuel efficiency, and potential transmission damage. |
| Possible causes | – Low voltage in torque converter clutch circuit – Faulty clutch or wiring – Control module issues |
| How to diagnose? | – Measure voltage in torque converter clutch circuit – Inspect wiring and connectors – Check for shorts or damage – Replace components as needed |
P2769 Meaning
The P2769: Torque Converter Clutch Circuit Low code indicates that the voltage in the TCC control circuit is below the expected level. This could be due to a problem with the wiring, such as an open circuit or a poor connection, a malfunctioning torque converter clutch solenoid, or a control module issue that prevents the circuit from getting adequate voltage. The TCC is responsible for engaging the torque converter to improve fuel economy and allow efficient power transfer between the engine and transmission.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to see if there are any additional codes that might indicate related problems in the transmission or TCC system. These codes may provide further information on the source of the low voltage issue. | OBD-II Scanner |
| Measure Voltage in TCC Circuit | Use a multimeter to measure the voltage in the torque converter clutch circuit. Compare the voltage to the manufacturer’s specifications. If it is below the required level, this indicates a problem in the circuit that must be resolved. | Multimeter, Manufacturer Specifications |
| Inspect Wiring and Connectors | Perform a thorough visual inspection of the wiring and connectors for the TCC circuit. Look for any loose, disconnected, corroded, or damaged wiring and connectors that could lead to a voltage drop. | Flashlight, Safety Gloves |
| Check for Shorts or Open Circuits | Use a multimeter to check for continuity in the wiring leading to the TCC solenoid. Look for shorts to ground, open circuits, or any points of high resistance that could be causing a voltage drop. Shorts or open circuits can disrupt the proper voltage supply. | Multimeter |
| Test the Torque Converter Clutch Solenoid | Verify the condition and performance of the TCC solenoid using a diagnostic tool. If the solenoid is not functioning correctly, it could result in low voltage or no response in the TCC circuit. | Diagnostic Tool, Multimeter |
| Verify Control Module Operation | Use a diagnostic tool to ensure that the transmission control module (TCM) is functioning correctly and is capable of providing proper voltage to the TCC solenoid. If the TCM is unable to do so, it could be contributing to the low voltage issue. | Diagnostic Tool, Manufacturer Software |
| Replace Faulty Components as Needed | If any component is found to be defective—such as the TCC solenoid, wiring, or connectors—replace it accordingly. If the control module is causing the issue, consider repairing or replacing it to restore proper operation of the TCC circuit. | Replacement Solenoid, Wiring Repair Kit |
| Clear the Code and Test Drive | After making the necessary repairs, use an OBD-II scanner to clear the P2769 code. Conduct a test drive to ensure that the torque converter clutch is engaging correctly and that the transmission is functioning smoothly. | OBD-II Scanner |
| Recheck for Codes | Perform a final scan to verify that the P2769 code has not returned. If the code persists, further diagnostics may be necessary to locate the root cause of the low voltage in the TCC circuit. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
