The P2762: Torque Converter Clutch Pressure Control Solenoid Control Circuit Range/Performance code indicates that the performance of the torque converter clutch (TCC) pressure control solenoid is outside of the expected range. This may result from a faulty solenoid, wiring or connector problems, or issues with the control module. The TCC solenoid manages the hydraulic pressure applied to the torque converter clutch, and if its performance is not within the acceptable range, it can affect the efficiency and functionality of the transmission.
P2762 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2762: Torque Converter Clutch Pressure Control Solenoid Control Circuit Range/Performance |
| Is it serious? | Yes, this code can lead to improper transmission performance, resulting in issues like slipping, rough shifting, reduced fuel efficiency, and potential damage to transmission components. |
| Possible causes | – Out-of-range performance of torque converter clutch pressure control solenoid – Faulty solenoid or control module – Wiring or connector issues |
| How to diagnose? | – Check the performance of the torque converter clutch pressure control solenoid – Inspect wiring and connectors – Verify control module functionality – Replace faulty components as needed |
P2762 Meaning
The P2762: Torque Converter Clutch Pressure Control Solenoid Control Circuit Range/Performance code indicates that the torque converter clutch pressure control solenoid is not operating as expected, providing values that are either higher or lower than specified by the manufacturer. This might result from a malfunction in the solenoid itself, problems with electrical connections, or faults in the control module. Incorrect TCC solenoid performance can lead to problems with torque converter lock-up, affecting transmission smoothness and efficiency.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to determine if there are any additional related codes present. These codes might help to identify further issues affecting the performance of the TCC solenoid. | OBD-II Scanner |
| Check the Performance of TCC Pressure Control Solenoid | Use a diagnostic tool or multimeter to test the TCC pressure control solenoid. Compare its performance values, such as resistance and voltage output, to the manufacturer’s specifications. If these readings are not within the acceptable range, the solenoid may be faulty. | Multimeter, Diagnostic Tool, Manufacturer Specifications |
| Inspect Wiring and Connectors | Visually inspect all wiring and connectors associated with the TCC solenoid for signs of damage, corrosion, or poor connections. Damaged wiring can lead to improper signal transmission, affecting solenoid performance. | Flashlight, Safety Gloves |
| Check for Shorts or Open Circuits | Use a multimeter to check for continuity in the wiring. Look for shorts to ground or power, as well as open circuits that could result in out-of-range signals. | Multimeter |
| Verify Control Module Functionality | Use a diagnostic tool to ensure that the transmission control module is correctly communicating with the TCC solenoid. If the control module is malfunctioning, it may incorrectly regulate the solenoid’s pressure control, leading to out-of-range performance. | Diagnostic Tool, Manufacturer Software |
| Replace Faulty Components as Needed | If any faulty components are identified, such as the TCC solenoid, wiring, or connectors, replace them. If the control module is found to be causing the issue, consider repairing or replacing it. Ensure that all replacement parts meet the manufacturer’s specifications. | Replacement Solenoid, Wiring Repair Kit |
| Clear the Code and Test Drive | After completing the necessary repairs, use an OBD-II scanner to clear the P2762 code. Conduct a test drive to verify that the TCC solenoid operates within the correct range and that transmission performance is smooth and stable. | OBD-II Scanner |
| Recheck for Codes | Perform a final scan to confirm that the P2762 code has not returned. If the code persists, further diagnostics may be required to pinpoint any remaining issues affecting the circuit range or solenoid performance. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
