The P2735: Pressure Control Solenoid ‘F’ Intermittent refers to an issue where the signal to pressure control solenoid ‘F’ is inconsistent, which could be due to faulty wiring, a failing solenoid, or control module problems. This can lead to irregular transmission fluid pressure control, causing shifting issues or other drivability problems.
P2735 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2735: Pressure Control Solenoid ‘F’ Intermittent |
| Is it serious? | Yes, an intermittent issue can lead to unpredictable transmission behavior, impacting the safety and drivability of the vehicle. |
| Possible causes | – Intermittent issue with pressure control solenoid ‘F’ – Faulty solenoid or wiring – Control module issues |
| How to diagnose? | – Inspect and test pressure control solenoid ‘F’ for intermittent faults – Check wiring and connectors for loose connections – Verify control module operation – Replace faulty components as needed |
P2735 Meaning
The P2735: Pressure Control Solenoid ‘F’ Intermittent code indicates that there is an intermittent electrical problem affecting the function of pressure control solenoid ‘F’. This issue may cause the solenoid to sometimes work properly and sometimes fail, leading to inconsistent transmission fluid pressure regulation and erratic shifting. The problem may be related to a loose connection, damaged wiring, or a control module fault.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to determine if there are any other related transmission or solenoid codes that could help pinpoint the source of the intermittent issue. | OBD-II Scanner |
| Inspect Pressure Control Solenoid ‘F’ | Visually inspect solenoid ‘F’ for any obvious signs of damage or wear. Ensure that it is free of debris and can move properly without obstruction. | Flashlight, Safety Gloves |
| Test Pressure Control Solenoid ‘F’ for Intermittent Faults | Use a multimeter to test the resistance and continuity of the solenoid over time. Gently move the wiring harness to detect any changes that might indicate a loose or broken connection. | Multimeter, Diagnostic Tool |
| Check Wiring and Connectors for Loose Connections | Carefully inspect the wiring and connectors to solenoid ‘F’ for any signs of looseness, corrosion, or damage that could cause an intermittent connection. | Flashlight, Multimeter |
| Verify Control Module Operation | Use a diagnostic tool to verify that the control module is properly sending and receiving signals to and from solenoid ‘F’. An intermittent signal may indicate a control module issue. | Diagnostic Tool, Manufacturer Software |
| Replace Faulty Components as Needed | Replace any components found to be faulty, including the pressure control solenoid, wiring, or connectors. If the control module is at fault, repair or replace it. | Replacement Solenoid, Wiring Repair Kit |
| Clear the Code and Test Drive | After making the necessary repairs, use an OBD-II scanner to clear the P2735 code. Take the vehicle for a test drive to verify that the issue has been resolved. | OBD-II Scanner |
| Recheck for Codes | Perform a final scan to ensure that the P2735 code does not return after the test drive. If it does reappear, further diagnosis is needed. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
