The P2713: Pressure Control Solenoid ‘D’ code indicates that there is an issue with the pressure control solenoid ‘D’ in the transmission. This problem could be due to a faulty solenoid, wiring issues, or a malfunction in the Transmission Control Module (TCM). The pressure control solenoid helps regulate the hydraulic pressure needed for smooth gear shifting, and any malfunction can lead to improper gear changes or transmission slippage.
P2713 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2713: Pressure Control Solenoid ‘D’ |
| Is it serious? | Yes, as a faulty pressure control solenoid can lead to improper hydraulic pressure regulation, causing erratic shifting, transmission slippage, and potential damage to the transmission system. |
| Possible causes | – Faulty pressure control solenoid ‘D’ – Wiring or connector issues – Control module problems |
| How to diagnose? | – Inspect and test pressure control solenoid ‘D’ – Check wiring and connectors – Verify control module functionality – Replace faulty solenoid or components as needed |
P2713 Meaning
The P2713: Pressure Control Solenoid ‘D’ code is triggered when the TCM detects an issue with the operation of pressure control solenoid ‘D’. This solenoid controls the hydraulic pressure that is used to engage the gears properly and regulate transmission performance. A malfunction in this solenoid could lead to improper shifting, gear slippage, or even prevent the transmission from engaging correctly. The issue may be due to a solenoid failure, problems with the wiring, or a control signal error from the TCM.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check if there are any other related codes. These can provide more insight into whether the problem is isolated to solenoid ‘D’ or is part of a broader transmission issue. | OBD-II Scanner |
| Inspect Pressure Control Solenoid ‘D’ | Locate and inspect pressure control solenoid ‘D’. Check for signs of physical damage, contamination, or any visible issues that might affect the solenoid’s operation. | Flashlight, Safety Gloves |
| Test Solenoid Electrical Resistance | Use a multimeter to measure the resistance of pressure control solenoid ‘D’. Compare the measurement with the manufacturer’s specifications. If the resistance is outside of the recommended range, the solenoid may be faulty. | Multimeter |
| Activate Solenoid Using a Diagnostic Scanner | Use a diagnostic scanner to activate pressure control solenoid ‘D while monitoring its response. If the solenoid fails to actuate as expected, it may need to be replaced. | Diagnostic Scanner |
| Check Wiring and Connectors | Inspect the wiring and connectors leading to pressure control solenoid ‘D’. Look for frayed wires, loose connections, corrosion, or signs of damage that could disrupt electrical flow to the solenoid. | Flashlight, Multimeter |
| Check for Voltage and Signal at the Solenoid | Verify that the correct voltage is being supplied to the solenoid from the TCM. Use a multimeter to measure the voltage and ensure it is consistent with the manufacturer’s specifications. Inconsistent voltage could indicate wiring or control issues. | Multimeter |
| Inspect the Transmission Control Module (TCM) | Use a diagnostic scanner to verify that the TCM is sending proper signals to solenoid ‘D’. If the TCM is not functioning correctly, it could be causing improper operation of the solenoid. | Diagnostic Scanner |
| Replace Faulty Components | If the solenoid is found to be defective or if wiring/connectors are damaged, replace the faulty components. Ensure the replacement solenoid matches the manufacturer’s specifications. | Replacement Solenoid, Wiring |
| Refill Transmission Fluid (if necessary) | If the solenoid was replaced and the transmission fluid was drained during the process, refill the transmission with the manufacturer-recommended type and level of fluid. | Transmission Fluid, Funnel |
| Clear the Code and Test System | Use an OBD-II scanner to clear the P2713 code after completing repairs. Conduct a test drive to ensure that pressure control solenoid ‘D’ is functioning properly and that the transmission is shifting smoothly. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Re-scan the vehicle to ensure that the P2713 code has not returned and that all transmission systems, including pressure control solenoid ‘D’, are operating as intended. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
