The P2680: Coolant Degassing Valve Control Circuit High refers to a condition where the voltage in the coolant degassing valve control circuit is higher than expected. This issue could be caused by a malfunctioning coolant degassing valve, a problem in the wiring, or connector issues, potentially affecting the efficiency of the engine cooling system.
P2680 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2680: Coolant Degassing Valve Control Circuit High |
| Is it serious? | Yes, high voltage in the control circuit can cause improper operation of the coolant degassing valve, leading to cooling system inefficiency and risk of overheating. |
| Possible causes | – High voltage in the coolant degassing valve control circuit – Faulty coolant degassing valve – Wiring or connector issues |
| How to diagnose? | – Measure voltage in the coolant degassing valve control circuit – Inspect the coolant degassing valve and wiring – Check for shorts or damage in connectors – Replace faulty components as needed |
P2680 Meaning
The P2680: Coolant Degassing Valve Control Circuit High code indicates that the voltage in the coolant degassing valve control circuit is too high, which might be the result of a short to power, faulty control valve, or problems with the wiring or connectors. The coolant degassing valve is crucial for proper regulation of coolant flow, and excess voltage could result in improper valve function, leading to overheating or damage to the engine.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to determine if there are any additional codes that might indicate related cooling system or electrical issues. | OBD-II Scanner |
| Measure Voltage in Control Circuit | Use a multimeter to measure the voltage in the coolant degassing valve control circuit. Compare the reading to the manufacturer’s specifications to determine if the voltage is too high. | Multimeter |
| Inspect Coolant Degassing Valve | Visually inspect the coolant degassing valve to check for physical damage or overheating. Ensure that it is properly installed and not receiving excess voltage. | Flashlight, Safety Gloves |
| Check Wiring and Connectors | Inspect all wiring and connectors associated with the coolant degassing valve for signs of a short to power, damaged insulation, or corroded connectors. | Flashlight, Multimeter |
| Inspect for Short Circuits | Use a multimeter to check for any shorts to power in the circuit that may be causing the high voltage. Ensure there are no unintentional connections to the power supply. | Multimeter |
| Replace Faulty Components | Replace any faulty components, such as a defective coolant degassing valve, damaged wiring, or faulty connectors, that are identified during inspection. | Replacement Parts |
| Clear the Code and Test System | Clear the error code using an OBD-II scanner after completing the necessary repairs. Perform a test drive to ensure the high voltage issue is resolved and the cooling system functions correctly. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Re-scan the vehicle to confirm that the P2680 code has not returned and verify that all cooling system controls are functioning properly. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
