The P2671: Actuator Supply Voltage ‘B’ Circuit High refers to a problem where the voltage in the actuator supply circuit ‘B’ is higher than expected. This can be caused by issues with the supply circuit, a faulty actuator, or wiring and connector problems, potentially leading to improper functioning of vehicle components that depend on the correct voltage supply.
P2671 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2671: Actuator Supply Voltage ‘B’ Circuit High |
| Is it serious? | Yes, high voltage can damage the actuator or other connected components, affecting vehicle reliability and performance. |
| Possible causes | – High voltage in the actuator supply circuit – Faulty actuator or supply circuit – Wiring or connector issues |
| How to diagnose? | – Measure voltage in the actuator supply circuit – Inspect the supply circuit and wiring – Check for shorts or damage in connectors – Replace components as needed |
P2671 Meaning
The P2671: Actuator Supply Voltage ‘B’ Circuit High code indicates that the actuator supply voltage in the ‘B’ circuit is above the expected range. This could result from issues such as a short to power, faulty wiring, or a malfunctioning actuator. High voltage can lead to overheating, potential failure of actuators, and improper operation of related systems, thereby affecting the vehicle’s performance and safety.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to identify any additional related codes that might help pinpoint related issues. | OBD-II Scanner |
| Measure Voltage in Supply Circuit | Use a multimeter to measure the voltage in the actuator supply circuit to confirm if it is above the specified limits set by the manufacturer. | Multimeter |
| Inspect the Supply Circuit | Visually inspect the actuator supply circuit for any visible signs of damage, wear, or loose connections. | Flashlight, Safety Gloves |
| Check Wiring and Connectors | Examine all wiring and connectors for shorts, damage, or corrosion that might cause increased voltage. | Flashlight, Multimeter |
| Inspect Actuator for Faults | Test the actuator to ensure it is not causing the high voltage issue. Replace it if it is malfunctioning or shows irregular voltage behavior. | Multimeter, Diagnostic Tool |
| Check for Short to Power | Inspect the circuit for any areas where wiring might be shorted to a power source, causing an abnormal increase in voltage. | Multimeter, Flashlight |
| Replace Faulty Components | Replace any identified faulty components, such as wiring, connectors, or the actuator itself, to rectify the high voltage issue. | Replacement Parts |
| Clear the Code and Test System | After repairs are completed, use an OBD-II scanner to clear the error code and perform a system check to ensure the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Re-scan the vehicle to confirm that the P2671 code has not returned, and verify that all associated systems are functioning properly. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
