The P255B: PTO Speed Selector Sensor/Switch 2 Range/Performance refers to a problem where the PTO (Power Take-Off) speed selector sensor or switch 2 is either out of its normal operating range or not performing as expected. This may be due to a faulty sensor, incorrect sensor readings caused by circuit issues, or wiring problems.
P255B – Quick Overview
| Code | Information |
|---|---|
| Meaning | P255B: PTO Speed Selector Sensor/Switch 2 Range/Performance |
| Is it serious? | Yes, as range or performance issues can affect the PTO system’s ability to manage speed properly, impacting auxiliary equipment operations. |
| Possible causes | – Range or performance issues with the PTO speed selector sensor/switch 2 – Faulty PTO speed selector sensor/switch – Wiring or connector problems |
| How to diagnose? | – Test the range and performance of the PTO speed selector sensor/switch 2 – Inspect and test the PTO speed selector sensor/switch – Check wiring and connectors – Replace faulty components if needed |
P255B Meaning
The P255B: PTO Speed Selector Sensor/Switch 2 Range/Performance code indicates that the readings or behavior of the PTO speed selector sensor/switch 2 are outside the expected parameters. This may lead to improper engagement or speed regulation of the PTO system, affecting devices that depend on PTO for power, such as plows or pumps. The cause could be an issue with the sensor itself, a malfunction in the circuit, or wiring problems affecting signal quality.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to determine if there are other related codes that may help provide further context or point to issues in the PTO system. | OBD-II Scanner |
| Test Range and Performance of PTO Speed Selector Sensor/Switch 2 | Use a diagnostic tool to measure the output signal and compare it to manufacturer specifications. Ensure the sensor is operating within its defined range under different conditions. | Multimeter, Diagnostic Tool |
| Inspect the PTO Speed Selector Sensor/Switch 2 | Visually inspect the sensor for any physical damage or signs of wear. Ensure that it is installed securely and that there are no obstructions that might affect its performance. | Flashlight, Safety Gloves |
| Check Wiring and Connectors | Inspect all wiring and connectors connected to the PTO speed selector sensor/switch 2. Look for damaged, loose, or corroded connectors, as these can impact the sensor’s ability to perform accurately. | Flashlight, Multimeter |
| Repair or Replace Faulty Wiring/Connectors | If any damaged wiring or connectors are found, repair or replace them to ensure a reliable connection and consistent signal. Faulty wiring can lead to incorrect performance or out-of-range signals. | Basic Tools, Replacement Parts |
| Replace Faulty PTO Speed Selector Sensor/Switch | If testing reveals that the sensor is not performing within the required range, replace it. Ensure the replacement sensor is calibrated and tested for proper function. | Replacement PTO Speed Selector Sensor/Switch |
| Clear the Code and Test Drive | After completing repairs, clear the code using an OBD-II scanner. Engage the PTO system under load to verify proper operation and ensure that the fault code does not reappear. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Re-scan the vehicle with the OBD-II scanner to confirm that the P255B code has been resolved. If the code persists, further diagnostics may be needed to determine additional issues. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)