The P2524: A/C Request ‘B’ Circuit High code refers to an issue where the voltage or signal in the A/C request ‘B’ circuit is higher than expected. This may indicate a problem with the A/C request control module, a wiring issue, or a connector problem causing excessive voltage. A high signal in this circuit can lead to improper functioning of the air conditioning system, affecting cooling performance.
P2524 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2524: A/C Request ‘B’ Circuit High |
| Is it serious? | Moderately serious. It can prevent proper activation of the A/C system, leading to erratic or non-functional cooling. |
| Possible causes | – High voltage or signal in the A/C request ‘B’ circuit – Faulty A/C request control – Wiring or connector issues |
| How to diagnose? | – Measure the voltage in the A/C request ‘B’ circuit – Inspect and test the A/C request control – Check wiring and connectors – Replace faulty components if needed |
Code Meaning
The P2524: A/C Request ‘B’ Circuit High code indicates that the voltage in the A/C request ‘B’ circuit is above the expected range. This issue could be caused by a short to power, a malfunctioning A/C request control, or wiring problems. If the voltage is too high, the circuit may be unable to properly communicate with the control system, preventing the air conditioning system from engaging effectively.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to determine if there are other related codes present. Additional codes may provide more insight into issues affecting the A/C system or related circuits. | OBD-II Scanner |
| Measure Voltage in the A/C Request ‘B’ Circuit | Use a multimeter to measure the voltage in the A/C request ‘B’ circuit. Compare the voltage readings to the specifications outlined in the vehicle’s service manual. If the voltage is higher than expected, proceed with identifying the cause. | Multimeter |
| Inspect the A/C Request Control Module | Inspect the A/C request control module for any signs of physical damage, such as burnt components or corrosion. Ensure that the connectors are properly seated and free from contamination. | Flashlight, Safety Gloves |
| Check Wiring and Connectors | Examine all wiring and connectors in the A/C request ‘B’ circuit for loose connections, corrosion, or damaged insulation that may be causing an abnormal increase in voltage. Repair or replace any wiring or connectors found to be in poor condition. | Flashlight, Multimeter |
| Test the A/C Request Control | Use a diagnostic tool or multimeter to test the output from the A/C request control. The output voltage should fall within the expected range when the system is activated. Replace the control if it provides consistently high voltage or is unresponsive. | Multimeter, Diagnostic Tool |
| Inspect for Short Circuits to Power | Carefully inspect the circuit for a short to power, which could result in an abnormally high voltage. Pay close attention to areas where wires may have been pinched or where insulation has been damaged. | Multimeter |
| Replace Faulty Components | Replace any components identified as faulty, such as the A/C request control module, connectors, or damaged wiring. Ensure that all replacements are OEM-specified parts to guarantee compatibility and function. | Replacement Parts, Vehicle Owner’s Manual |
| Clear the Code and Test the A/C System | After completing repairs, clear the P2524 code using an OBD-II scanner. Run the A/C system and observe its operation to confirm that the issue has been resolved and the voltage is within normal limits. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | Re-scan the vehicle to ensure that the P2524 code has not returned. If the code persists, further diagnosis will be needed to identify other potential faults. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
