The P2523: A/C Request ‘B’ Circuit Low code refers to a problem in the A/C request ‘B’ circuit where the voltage or signal is lower than expected. This can indicate a malfunctioning A/C request control, issues with wiring, or problems with connectors. Low voltage in this circuit can prevent the air conditioning system from properly engaging, resulting in reduced cooling performance and passenger discomfort.
P2523 – Quick Overview
Code | Information |
---|---|
Meaning | P2523: A/C Request ‘B’ Circuit Low |
Is it serious? | Moderately serious. This can prevent the A/C system from operating effectively, affecting cooling performance and comfort. |
Possible causes | – Low voltage or signal in the A/C request ‘B’ circuit – Faulty A/C request control – Wiring or connector issues |
How to diagnose? | – Measure the voltage in the A/C request ‘B’ circuit – Inspect and test the A/C request control – Check wiring and connectors – Replace faulty components if needed |
Code Meaning
The P2523: A/C Request ‘B’ Circuit Low code indicates that the voltage in the A/C request ‘B’ circuit is below the specified range. This low voltage condition could be due to insufficient power supply, a fault in the A/C request control, or poor connections in the wiring. A low signal can prevent the A/C system from receiving the proper command to activate, leading to cooling problems.
Step-by-step diagnostic guide
Action | Description | Tools Needed |
---|---|---|
Check for Other Codes | Use an OBD-II scanner to determine if there are other related codes. Additional codes might provide more information about potential issues within the A/C system or related circuits. | OBD-II Scanner |
Measure Voltage in the A/C Request ‘B’ Circuit | Use a multimeter to measure the voltage at different points in the A/C request ‘B’ circuit. Compare the readings with the manufacturer’s specifications to determine if the voltage is too low. | Multimeter |
Inspect the A/C Request Control Module | Visually inspect the A/C request control module for any signs of physical damage or corrosion. Ensure that the control module is securely mounted and the connectors are properly attached. | Flashlight, Safety Gloves |
Check Wiring and Connectors | Examine all wiring and connectors related to the A/C request ‘B’ circuit. Look for loose or corroded connectors, frayed wires, or damaged insulation that could be causing a drop in voltage. Repair or replace any damaged wiring or faulty connectors. | Flashlight, Multimeter |
Test the A/C Request Control | Use a multimeter or diagnostic tool to test the functionality of the A/C request control. Ensure that the control module is capable of sending a proper signal when the A/C is engaged. Replace the control module if it is not functioning within specifications. | Multimeter, Diagnostic Tool |
Verify Ground and Power Supply | Ensure that the circuit has a reliable power supply and a good ground connection. Poor grounding or insufficient power can result in a low voltage reading in the circuit. | Multimeter |
Inspect for Open Circuits | Check for any open circuits in the wiring of the A/C request ‘B’. An open circuit would result in no signal transmission and low voltage. Use a multimeter to verify continuity across the circuit. | Multimeter |
Replace Faulty Components | Replace any faulty components found during diagnostics, including the A/C request control module, connectors, or wiring. Use OEM components to ensure compatibility and proper function. | Replacement Parts, Vehicle Owner’s Manual |
Clear the Code and Test the A/C System | After completing the necessary repairs, clear the P2523 code using an OBD-II scanner. Run the A/C system to ensure it engages correctly and that the issue has been resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
Recheck for Codes | Re-scan the vehicle to confirm that the P2523 code has not returned. If the code reappears, further investigation may be needed to identify additional underlying issues. | OBD-II Scanner |

OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes

Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)