Fix P2481: STEP-BY-STEP diagnostic GUIDE!

The P2481: Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 5 refers to a problem where the exhaust gas temperature sensor (Bank 1 Sensor 5) is registering a low voltage. This could be due to a faulty sensor, wiring problems, or issues in the circuit itself, which can lead to improper monitoring of exhaust temperatures.

P2481 – Quick Overview

CodeInformation
MeaningP2481: Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 5
Is it serious?Yes, this can lead to inaccurate exhaust temperature readings and potential engine damage.
Possible causes– Low voltage in the exhaust gas temperature sensor circuit for Bank 1 Sensor 5
– Faulty sensor
– Wiring or connector issues
How to diagnose?– Measure voltage in the exhaust gas temperature sensor circuit for Bank 1 Sensor 5
– Inspect and test the sensor and wiring
– Replace faulty components if needed

P2481 Meaning

The P2481: Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 5 code indicates that the voltage detected by the exhaust gas temperature sensor (located at Bank 1 Sensor 5) is lower than expected. This may be due to a malfunctioning sensor, wiring issues, or poor electrical connections. If left unresolved, it could prevent proper monitoring of exhaust gas temperatures, leading to decreased performance and possible damage to the exhaust system.

Step-by-step diagnostic guide

ActionDescriptionTools Needed
Check for Other CodesUse an OBD-II scanner to determine if there are other related codes that could indicate multiple issues.OBD-II Scanner
Measure Voltage in Sensor CircuitMeasure the voltage in the exhaust gas temperature sensor circuit for Bank 1 Sensor 5. Ensure it matches manufacturer specifications.Multimeter
Inspect the SensorVisually inspect the exhaust gas temperature sensor for damage or wear. Verify that the sensor is properly seated and connected.Flashlight, Safety Gloves
Test the SensorTest the sensor’s resistance and compare it to the manufacturer’s specifications to ensure proper function.Multimeter
Inspect Wiring and ConnectorsCheck the wiring and connectors for damage, corrosion, or loose connections. Repair or replace as needed.Flashlight, Multimeter
Replace Faulty ComponentsReplace the exhaust gas temperature sensor or repair wiring if any faults are identified during inspection or testing.Replacement Sensor, Tools Set
Clear the Code and Test DriveClear the code using an OBD-II scanner and perform a test drive to verify if the problem has been resolved.OBD-II Scanner, Vehicle Owner’s Manual
Recheck for CodesAfter the test drive, re-scan the vehicle to confirm that the P2481 code has not returned. If the code reappears, further diagnosis may be required.OBD-II Scanner
Bluetooth OBD-II scanners

OBD-II scanner Buyer’s Guide

  • Scanner features explained
  • Different types of scanners
  • Scanners for coding/odometer/ECU/checks
  • Best picks + discount codes

Download PDF FREE

    Leave a Comment