The P2476: Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 4 refers to an issue where high voltage is detected in the exhaust gas temperature sensor circuit for Bank 2 Sensor 4. This condition can be caused by a malfunctioning sensor, wiring defects, or faulty connectors, leading to incorrect exhaust temperature readings and negatively impacting engine performance and emissions.
P2476 – Quick Overview
Code | Information |
---|---|
Meaning | P2476: Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 4 |
Is it serious? | Yes, this code can lead to inaccurate temperature readings, causing improper exhaust management, which may affect engine performance and emissions. |
Possible causes | – High voltage in the exhaust gas temperature sensor circuit for Bank 2 Sensor 4 – Faulty sensor – Wiring or connector issues |
How to diagnose? | – Measure voltage in the exhaust gas temperature sensor circuit for Bank 2 Sensor 4 – Inspect and test the sensor and wiring – Replace faulty components if needed |
P2476 Meaning
The P2476: Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 4 code signifies that the exhaust gas temperature sensor circuit for Bank 2 Sensor 4 is experiencing higher than expected voltage. This could mean the sensor is faulty or there is an issue with the circuit, such as a wiring defect or a loose connector, causing the sensor to send inaccurate data. This can lead to incorrect exhaust temperature regulation, affecting both engine efficiency and emissions.
Step-by-step diagnostic guide
Action | Description | Tools Needed |
---|---|---|
Check for Other Codes | Use an OBD-II scanner to see if any other related codes are present. Other codes may give further insight into related issues or systems affected. | OBD-II Scanner |
Inspect Sensor and Wiring Visually | Inspect the exhaust gas temperature sensor for visible damage, such as cracks or burn marks. Additionally, inspect the wiring and connectors for signs of wear, corrosion, or looseness. | Flashlight, Safety Gloves |
Measure Voltage in the Sensor Circuit | Use a multimeter to measure the voltage at the exhaust gas temperature sensor for Bank 2 Sensor 4. Compare the measured voltage against manufacturer specifications to verify if the voltage is higher than expected. | Multimeter, Manufacturer’s Specifications |
Test Sensor Performance | Utilize a diagnostic tool to evaluate the performance of the exhaust gas temperature sensor while the engine is running. Check for unusually high output signals that could indicate a sensor malfunction. | Diagnostic Tool, Multimeter |
Check Wiring Continuity | Use a multimeter to verify continuity in the wiring to ensure there are no shorts or faults that could be causing a high voltage condition. Pay special attention to any areas where the wiring could be pinched or damaged. | Multimeter |
Inspect Connectors | Check that all connectors are secure and free of corrosion. Clean or replace connectors if they appear damaged or corroded, as poor connections can contribute to erratic signals. | Contact Cleaner, Replacement Connectors |
Replace Faulty Sensor | If the sensor is found to be faulty, replace it with a new one that meets manufacturer standards. Ensure the new sensor is installed securely and properly connected. | Replacement Sensor, Basic Hand Tools |
Clear Code and Test Drive | Clear the P2476 code using an OBD-II scanner, and take the vehicle for a test drive. Monitor sensor readings to ensure the voltage levels are back to normal and the issue has been resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
Recheck for Codes | After the test drive, rescan the vehicle using the OBD-II scanner to verify that the P2476 code has been cleared and no new codes have emerged. If the code persists, further diagnostics will be required. | OBD-II Scanner |

OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes

Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)