Fix P2471: STEP-BY-STEP diagnostic GUIDE!

The P2471: Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 4 refers to an issue where high voltage is detected in the exhaust gas temperature sensor circuit for Bank 1 Sensor 4. This could be due to a faulty sensor, wiring issues, or connector problems, potentially leading to inaccurate exhaust temperature readings, which may impact engine efficiency and emissions control.

P2471 – Quick Overview

CodeInformation
MeaningP2471: Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 4
Is it serious?Yes, this code can lead to inaccurate temperature readings, resulting in improper exhaust management and potentially causing increased emissions or engine performance issues.
Possible causes– High voltage in the exhaust gas temperature sensor circuit for Bank 1 Sensor 4
– Faulty sensor
– Wiring or connector issues
How to diagnose?– Measure voltage in the exhaust gas temperature sensor circuit for Bank 1 Sensor 4
– Inspect and test the sensor and wiring
– Replace faulty components if needed

P2471 Meaning

The P2471: Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 4 code indicates that the sensor, specifically for Bank 1 Sensor 4, is reporting a higher voltage than expected. This could be the result of sensor malfunction, wiring issues, or a problem in the sensor circuit, which could lead to incorrect temperature monitoring and affect the engine’s emission control system.

Step-by-step diagnostic guide

ActionDescriptionTools Needed
Check for Other CodesUse an OBD-II scanner to check if there are any additional related codes that might offer more information or indicate other issues.OBD-II Scanner
Inspect Sensor and Wiring VisuallyVisually inspect the exhaust gas temperature sensor for any visible damage, such as cracks or burn marks. Also, check the wiring and connectors for any signs of damage, loose connections, or corrosion.Flashlight, Safety Gloves
Measure Voltage in the Sensor CircuitUse a multimeter to measure the voltage in the exhaust gas temperature sensor circuit for Bank 1 Sensor 4. Compare the readings with the manufacturer’s recommended range to determine if the voltage is too high.Multimeter, Manufacturer’s Specifications
Check Sensor FunctionalityUtilize a diagnostic tool to check the real-time sensor readings. Verify that the sensor is not producing abnormally high voltage during operation.Diagnostic Tool, Multimeter
Verify Wiring IntegrityUse a multimeter to verify continuity in the wiring to ensure there are no shorts or faults. This can help confirm if the issue lies within the wiring or sensor.Multimeter
Replace Faulty ComponentsIf the sensor or wiring is confirmed to be faulty, replace these components using approved parts. Ensure all connections are securely fastened and in good condition.Replacement Sensor, Basic Hand Tools
Clear Code and Test DriveClear the P2471 fault code using an OBD-II scanner, and then conduct a test drive. Monitor sensor readings during the drive to verify that the issue has been resolved.OBD-II Scanner, Vehicle Owner’s Manual
Recheck for CodesAfter the test drive, use the OBD-II scanner to recheck for any reoccurring codes. If the code persists, further diagnostics may be necessary to identify the root cause.OBD-II Scanner
Bluetooth OBD-II scanners

OBD-II scanner Buyer’s Guide

  • Scanner features explained
  • Different types of scanners
  • Scanners for coding/odometer/ECU/checks
  • Best picks + discount codes

Download PDF FREE

    Leave a Comment