The P246F: Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4 refers to an issue detected in the exhaust gas temperature sensor circuit specifically for Bank 1 Sensor 4. This problem might arise due to issues with sensor performance, faulty components, or wiring defects, which can affect the temperature readings crucial for optimal engine operation and emissions control.
P246F – Quick Overview
| Code | Information |
|---|---|
| Meaning | P246F: Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4 |
| Is it serious? | Yes, this code can lead to improper exhaust temperature readings, resulting in potential engine damage or increased emissions. |
| Possible causes | – Range or performance issues in the exhaust gas temperature sensor circuit for Bank 1 Sensor 4 – Faulty sensor – Wiring or connector issues |
| How to diagnose? | – Test the range and performance of the exhaust gas temperature sensor circuit for Bank 1 Sensor 4 – Inspect and test the sensor and wiring – Replace faulty components if needed |
P246F Meaning
The P246F: Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4 code signifies that the exhaust gas temperature sensor, specifically the one located at Bank 1 Sensor 4, is not performing within its expected range. This could lead to incorrect readings, affecting the engine’s ability to regulate temperatures efficiently, which might result in poor performance or elevated emissions.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to determine if there are additional codes that might provide more context or point to related issues. | OBD-II Scanner |
| Inspect Sensor and Wiring Visually | Inspect the exhaust gas temperature sensor for visible damage, loose connectors, or any wear in the wiring. Make sure all connections are secure and the wiring is not frayed or corroded. | Flashlight, Safety Gloves |
| Test the Exhaust Gas Temperature Sensor Circuit | Use a multimeter to measure the resistance of the exhaust gas temperature sensor circuit for Bank 1 Sensor 4. Compare values against manufacturer specifications. | Multimeter, Manufacturer’s Specifications |
| Check Sensor Performance | Use a diagnostic tool to test if the sensor is giving proper readings during engine operation. Look for temperature fluctuations or incorrect values. | Diagnostic Tool, Multimeter |
| Verify Wiring Continuity | Use a multimeter to check for continuity in the wiring leading to the sensor. Ensure there are no breaks or shorts in the circuit. | Multimeter |
| Replace Faulty Components | If the sensor or wiring is faulty, replace the defective parts accordingly. Ensure you use manufacturer-approved replacements. | Replacement Sensor, Basic Hand Tools |
| Clear Code and Test Drive | Clear the fault code using an OBD-II scanner, and then take the vehicle for a test drive to see if the issue reoccurs. Monitor sensor readings during the drive to ensure proper functionality. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, rescan the vehicle for any remaining or reappearing fault codes. If the code reappears, additional diagnosis may be necessary. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
