The P245A: Exhaust Gas Recirculation Cooler Bypass Control Circuit/Open code indicates that there is an issue in the EGR cooler bypass control system where the circuit is either open or not functioning properly. This can be due to a faulty EGR bypass control valve, damaged wiring, or connector issues, which may impact the proper cooling of exhaust gases.
P245A – Quick Overview
Code | Information |
---|---|
Meaning | P245A: Exhaust Gas Recirculation Cooler Bypass Control Circuit/Open |
Is it serious? | Moderate – an open circuit can lead to incorrect bypass operation, which may cause improper EGR cooling and increased emissions. |
Possible causes | – Open circuit in the EGR cooler bypass control system – Faulty bypass control valve – Wiring or connector issues |
How to diagnose? | – Inspect and test the EGR cooler bypass control circuit – Check wiring and connectors – Replace faulty components if needed |
P245A Meaning
The P245A: Exhaust Gas Recirculation Cooler Bypass Control Circuit/Open code means that the EGR cooler bypass control circuit is open, preventing the EGR cooler bypass from functioning as intended. The EGR bypass valve controls whether exhaust gases are cooled before being recirculated into the engine. If the circuit is open, the valve may not operate correctly, which can lead to higher exhaust gas temperatures entering the engine and increased NOx emissions.
Step-by-step diagnostic guide
Action | Description | Tools Needed |
---|---|---|
Check for Other Codes | Use an OBD-II scanner to check if there are any additional related fault codes. These may help provide more insight into other issues affecting the EGR system. | OBD-II Scanner |
Inspect the EGR Cooler Bypass Valve | Visually inspect the EGR cooler bypass valve for any signs of physical damage, such as cracks, corrosion, or improper connection. Verify that the valve is not stuck. | Flashlight, Safety Gloves |
Test the Bypass Control Circuit | Use a multimeter to test the EGR cooler bypass control circuit for continuity. Check for open circuits that could indicate a break in the wiring. | Multimeter |
Check Wiring and Connectors | Inspect all wiring and connectors associated with the EGR cooler bypass control circuit. Look for signs of fraying, loose connections, or corrosion that could lead to an open circuit. | Flashlight, Multimeter |
Repair or Replace Wiring | If the wiring or connectors are damaged or corroded, repair or replace them as necessary to ensure proper connectivity within the bypass control circuit. | Wiring Repair Kit, Connector Tools |
Test the Bypass Valve Functionality | Use a diagnostic tool to command the EGR bypass valve to open and close. Ensure that it responds properly to signals from the engine control module (ECM). | Diagnostic Tool |
Replace Faulty Components | If the EGR bypass valve itself is faulty, replace it with a new one to restore proper operation of the EGR system. | Replacement Bypass Valve, Wrench Set |
Clear the Code and Test Drive | Clear the P245A code using an OBD-II scanner, then take the vehicle for a test drive. Monitor the EGR system to ensure that the bypass is operating correctly. | OBD-II Scanner, Vehicle Owner’s Manual |
Recheck for Codes | Re-scan the vehicle after the test drive to verify that the P245A code has not returned. If the code persists, further diagnostics will be required to address the issue. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner

I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.

Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)