The P2252: O2 Sensor Negative Current Control Circuit Low Bank 1 Sensor 1 code refers to a situation where the negative current control circuit for the oxygen (O2) sensor in Bank 1 Sensor 1 is reading a voltage lower than expected. This can be caused by a faulty O2 sensor, issues with the wiring, or problems with the connectors. Low voltage in this circuit can prevent the sensor from accurately measuring exhaust gases, leading to incorrect air-fuel mixture adjustments.
P2252 – Quick Overview
Code | Information |
---|---|
Meaning | P2252: O2 Sensor Negative Current Control Circuit Low Bank 1 Sensor 1 |
Is it serious? | Yes, as a low voltage in the negative current control circuit can result in incorrect O2 sensor readings, affecting the engine’s air-fuel ratio and leading to increased emissions and reduced performance. |
Possible causes | – Low voltage in O2 sensor negative current control circuit for Bank 1 Sensor 1 – Faulty O2 sensor – Wiring issues – Connector problems |
How to diagnose? | – Measure voltage in the O2 sensor negative current control circuit for Bank 1 Sensor 1 – Test the sensor for proper operation – Inspect wiring and connectors for faults |
P2252 Meaning
The P2252: O2 Sensor Negative Current Control Circuit Low Bank 1 Sensor 1 code indicates that the negative current control circuit for the O2 sensor in Bank 1 Sensor 1 is experiencing an abnormally low voltage condition. This voltage is crucial for the O2 sensor to operate effectively. If the voltage is too low, it can lead to inaccurate readings, resulting in improper engine control of the air-fuel mixture, which may affect fuel economy, engine performance, and emission levels.
Step-by-step diagnostic guide
Action | Description | Tools Needed |
---|---|---|
Check for Other Codes | Use an OBD-II scanner to determine if there are additional related codes. Other codes might help indicate if this is part of a larger system fault or an isolated issue with the O2 sensor. | OBD-II Scanner |
Measure Voltage in the O2 Sensor Negative Current Control Circuit | Use a multimeter to measure the voltage in the negative current control circuit for Bank 1 Sensor 1. Compare the measured voltage to the manufacturer’s specifications. If the voltage is lower than expected, it could indicate issues with the power supply, wiring, or sensor itself. | Multimeter, Vehicle Service Manual |
Test the Sensor for Proper Operation | Test the O2 sensor using a diagnostic tool to verify its functionality. If the sensor is faulty or not functioning correctly, it may need to be replaced to resolve the low voltage issue. | Diagnostic Scanner, Multimeter |
Inspect Wiring and Connectors for Faults | Visually inspect the wiring and connectors associated with Bank 1 Sensor 1. Look for any signs of damage, such as frayed wires, corrosion on terminals, or loose connections that could lead to a drop in voltage. Repair or replace any damaged components. | Flashlight, Safety Gloves |
Check the Sensor Connector Condition | Examine the connector to ensure there are no bent pins, loose connections, or corrosion affecting the voltage. Proper connectivity is crucial to maintain accurate sensor readings. Securely attach the connector after ensuring it is clean and properly aligned. | Flashlight |
Clear the Code and Test Drive | After addressing any identified issues, use an OBD-II scanner to clear the fault code. Conduct a test drive while monitoring the sensor’s performance to verify that the negative current control voltage has returned to normal and the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
Recheck for Codes | Re-scan the vehicle after the test drive to ensure that the P2252 code has not returned. If the issue persists, further diagnostic procedures may be necessary to identify and correct the underlying problem. | OBD-II Scanner |

OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes

Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)