Fix P2242: STEP-BY-STEP diagnostic GUIDE!

The P2242: O2 Sensor Positive Current Control Circuit High Bank 2 Sensor 1 refers to an issue where the oxygen (O2) sensor positive current control circuit in Bank 2 Sensor 1 is reading an abnormally high voltage. This could be caused by a malfunctioning sensor, wiring issues, or connector problems. High voltage in this circuit can result in incorrect oxygen readings, affecting the air-fuel ratio and ultimately leading to reduced engine performance and increased emissions.

P2242 – Quick Overview

CodeInformation
MeaningP2242: O2 Sensor Positive Current Control Circuit High Bank 2 Sensor 1
Is it serious?Yes, as a high voltage condition can cause incorrect air-fuel ratio adjustments, potentially leading to poor fuel efficiency and increased emissions.
Possible causes– High voltage in O2 sensor positive current control circuit for Bank 2 Sensor 1
– Faulty O2 sensor
– Wiring issues
– Connector problems
How to diagnose?– Measure voltage in the O2 sensor positive current control circuit for Bank 2 Sensor 1
– Test the O2 sensor for proper operation
– Inspect wiring and connectors for faults

P2242 Meaning

The P2242: O2 Sensor Positive Current Control Circuit High Bank 2 Sensor 1 code indicates that the oxygen sensor for Bank 2 Sensor 1 is experiencing higher than expected voltage in its positive current control circuit. This high voltage can disrupt the sensor’s ability to provide accurate data to the engine control unit, affecting the proper adjustment of the air-fuel mixture and, consequently, engine efficiency and emissions control.

Step-by-step diagnostic guide

ActionDescriptionTools Needed
Check for Other CodesUse an OBD-II scanner to determine if other related codes are present. This could help identify if the issue is isolated to Bank 2 Sensor 1 or if there is a broader problem.OBD-II Scanner
Measure Voltage in the O2 Sensor Positive Current Control CircuitUse a multimeter to measure the voltage of the positive current control circuit for the O2 sensor in Bank 2 Sensor 1. Compare the voltage readings to the manufacturer’s specifications to determine if the voltage is above the acceptable range.Multimeter, Vehicle Service Manual
Test the O2 SensorTest the O2 sensor to verify proper operation. If the sensor is not functioning correctly, it may be the cause of the high voltage reading, and replacement may be necessary.Multimeter, Diagnostic Tool
Inspect Wiring and Connectors for FaultsInspect all wiring and connectors related to the O2 sensor. Look for any signs of damage, such as melted insulation, frayed wires, or loose connections, which could contribute to excessive voltage in the circuit. Repair or replace any faulty components.Flashlight, Safety Gloves
Check the Sensor Connector ConditionCarefully examine the sensor connector to ensure there are no bent pins, corrosion, or poor connections. Issues with the connector can cause incorrect voltage readings. Make sure the connector is firmly and correctly attached.Flashlight
Clear the Code and Test DriveAfter addressing any identified issues, clear the code using an OBD-II scanner. Conduct a test drive to monitor the sensor’s performance and ensure the problem has been resolved.OBD-II Scanner, Vehicle Owner’s Manual
Recheck for CodesRe-scan the vehicle after the test drive to verify that the P2242 code has not returned. If the code reappears, additional diagnostics will be needed to determine any underlying issues.OBD-II Scanner
Bluetooth OBD-II scanners

OBD-II scanner Buyer’s Guide

  • Scanner features explained
  • Different types of scanners
  • Scanners for coding/odometer/ECU/checks
  • Best picks + discount codes

Download PDF FREE

    Leave a Comment