Fix P222D: STEP-BY-STEP diagnostic GUIDE!

The P222D: Barometric Pressure Sensor ‘B’ Circuit High refers to a situation where the barometric pressure sensor ‘B’ is detecting a higher voltage than expected. This could be caused by wiring problems, a faulty sensor, or issues with the connector, which may affect accurate pressure readings and ultimately impact engine performance.

P222D – Quick Overview

CodeInformation
MeaningP222D: Barometric Pressure Sensor ‘B’ Circuit High
Is it serious?Yes, as high voltage readings can disrupt engine performance and reduce efficiency.
Possible causes– High voltage in the barometric pressure sensor ‘B’ circuit
– Faulty barometric pressure sensor ‘B’
– Wiring issues
– Connector problems
How to diagnose?– Measure voltage in the barometric pressure sensor ‘B’ circuit
– Test the sensor for proper operation
– Inspect wiring and connectors for issues

P222D Meaning

The P222D: Barometric Pressure Sensor ‘B’ Circuit High code indicates that the barometric pressure sensor, which measures atmospheric pressure, is detecting a voltage level that is too high. This may lead to incorrect pressure data being sent to the engine control module, which can negatively impact engine performance and fuel mixture control.

Step-by-step diagnostic guide

ActionDescriptionTools Needed
Check for Other CodesUse an OBD-II scanner to determine if there are any additional codes present. Other codes can help indicate whether the issue is part of a larger problem.OBD-II Scanner
Measure Voltage in Sensor ‘B’ CircuitUse a multimeter to measure the voltage in the barometric pressure sensor ‘B’ circuit. Compare this voltage to the specifications in the vehicle’s manual to determine if it exceeds normal levels.Multimeter, Vehicle Service Manual
Test the SensorTest the barometric pressure sensor ‘B’ to verify if it is functioning correctly. If the sensor is faulty, it may need to be replaced.Multimeter, Diagnostic Tool
Inspect Wiring and ConnectorsInspect the wiring and connectors leading to the sensor for any signs of damage, such as cuts, corrosion, or loose connections. Make sure all connectors are properly seated.Flashlight, Safety Gloves
Check Connector ConditionEnsure that the sensor connector pins are not bent, and that there are no loose connections or signs of wear that could cause poor contact.Flashlight
Clear the Code and Test DriveOnce repairs have been made, clear the code using an OBD-II scanner and perform a test drive to ensure that the issue is resolved.OBD-II Scanner, Vehicle Owner’s Manual
Recheck for CodesAfter the test drive, re-scan the vehicle to confirm that the P222D code has not returned. If it reappears, further diagnosis may be required.OBD-II Scanner
Bluetooth OBD-II scanners

OBD-II scanner Buyer’s Guide

  • Scanner features explained
  • Different types of scanners
  • Scanners for coding/odometer/ECU/checks
  • Best picks + discount codes

Download PDF FREE

    Leave a Comment