The P2215: NOx Sensor Circuit Low Bank 2 refers to a condition where the voltage in the NOx sensor circuit for bank 2 is lower than expected. This can be caused by a faulty NOx sensor, wiring issues, or connector problems, resulting in incorrect NOx readings.
P2215 – Quick Overview
Code | Information |
---|---|
Meaning | P2215: NOx Sensor Circuit Low Bank 2 |
Is it serious? | Yes, low voltage can prevent the NOx sensor from providing accurate emissions readings, leading to higher emissions and poor engine performance. |
Possible causes | – Low voltage in NOx sensor circuit in bank 2 – Faulty sensor or wiring issues – Connector problems |
How to diagnose? | – Measure voltage in the NOx sensor circuit in bank 2 – Test the NOx sensor for faults – Inspect wiring and connectors for issues |
P2215 Meaning
The P2215: NOx Sensor Circuit Low Bank 2 code indicates that the engine control module (ECM) has detected lower-than-expected voltage in the NOx sensor circuit for bank 2 (the side of the engine not containing cylinder 1). The NOx sensor is responsible for monitoring nitrogen oxide levels in the exhaust gases to manage emissions. A low voltage signal may prevent the sensor from functioning correctly, resulting in inaccurate emissions readings and potentially higher NOx emissions.
Step-by-step diagnostic guide
Action | Description | Tools Needed |
---|---|---|
Check for Other Codes | Use an OBD-II scanner to check for additional related codes that may provide more insight into the NOx sensor circuit issue. | OBD-II Scanner |
Measure Voltage in NOx Sensor Circuit | Use a multimeter to measure the voltage in the NOx sensor circuit in bank 2. Compare the reading to the manufacturer’s specifications to ensure it falls within the correct range. | Multimeter, Vehicle Manual |
Test the NOx Sensor | Use a diagnostic tool or multimeter to test the NOx sensor itself. Verify that it is providing the proper output based on manufacturer specifications. | Multimeter, Diagnostic Tool |
Inspect Wiring and Connectors | Visually inspect the wiring and connectors for the NOx sensor in bank 2. Look for damaged wires, corrosion, or loose connections that could cause low voltage. | Flashlight, Safety Gloves |
Check Sensor Circuit Continuity | Test for continuity in the NOx sensor circuit to ensure there are no open circuits or areas of high resistance that could result in low voltage. | Multimeter, Wiring Diagram |
Repair or Replace Faulty Components | If any wiring, connectors, or the NOx sensor itself are found to be faulty, repair or replace them as necessary to restore proper voltage and functionality. | Replacement Parts, Tools |
Clear the Code and Test Drive | After repairs, clear the P2215 code using an OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved. | OBD-II Scanner |
Recheck for Codes | After the test drive, re-scan the vehicle to confirm that the P2215 code does not return. | OBD-II Scanner |

OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes

Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)