Fix P2144: STEP-BY-STEP diagnostic GUIDE!

The P2144: Exhaust Gas Recirculation (EGR) Vent Control Circuit Low refers to a low voltage condition in the EGR vent control circuit. This issue could be due to a faulty EGR vent control, wiring problems, or electrical faults that disrupt the EGR system’s normal operation.

P2144 – Quick Overview

CodeInformation
MeaningP2144: Exhaust Gas Recirculation Vent Control Circuit Low
Is it serious?Yes, it can cause improper EGR operation, leading to drivability issues and increased emissions.
Possible causes– Low voltage in the EGR vent control circuit
– Faulty EGR vent control
– Wiring issues
How to diagnose?– Measure voltage in the EGR vent control circuit
– Test the EGR vent control
– Inspect wiring and connections

P2144 Meaning

The P2144 code indicates that the voltage in the exhaust gas recirculation (EGR) vent control circuit is lower than expected. The EGR vent control helps regulate the flow of exhaust gases into the intake system, and low voltage can prevent the system from functioning properly, leading to increased emissions and poor engine performance.

Step-by-step diagnostic guide

ActionDescriptionTools Needed
Check for Other CodesUse an OBD-II scanner to check for any related codes that might provide more context for the EGR system’s fault.OBD-II Scanner
Measure Voltage in the CircuitUse a multimeter to measure the voltage in the EGR vent control circuit. Compare the readings to the manufacturer’s specifications to determine if the voltage is too low.Multimeter
Test the EGR Vent ControlUse a diagnostic tool to test the EGR vent control. Ensure it is operating within the expected parameters. If the EGR vent control is faulty, it should be replaced.Diagnostic Tool
Inspect Wiring and ConnectionsVisually inspect the wiring and connectors for the EGR vent control for signs of damage, loose connections, or corrosion. Repair or replace any faulty wiring as necessary.Flashlight, Multimeter
Check for Open CircuitsUse a multimeter to test for continuity in the wiring to detect any open circuits that may be causing low voltage in the circuit. Repair as needed.Multimeter, Wiring Diagram
Clear the Code and Test DriveAfter repairs or adjustments, clear the code using an OBD-II scanner and take the vehicle for a test drive to confirm that the issue is resolved.OBD-II Scanner
Recheck for CodesAfter the test drive, re-scan the vehicle to ensure that the P2144 code has not returned.OBD-II Scanner
Bluetooth OBD-II scanners

OBD-II scanner Buyer’s Guide

  • Scanner features explained
  • Different types of scanners
  • Scanners for coding/odometer/ECU/checks
  • Best picks + discount codes

Download PDF FREE

    Leave a Comment