Fix P2136: STEP-BY-STEP diagnostic GUIDE!

The P2136: Throttle/Pedal Position Sensor/Switch A / C Voltage Correlation refers to an issue where the voltage signals between throttle/pedal position sensors ‘A’ and ‘C’ do not match as expected. This can be caused by faulty sensors, wiring problems, or calibration issues, affecting throttle control and vehicle performance.

P2136 – Quick Overview

CodeInformation
MeaningP2136: Throttle/Pedal Position Sensor/Switch A / C Voltage Correlation
Is it serious?Yes, it can lead to throttle control issues and drivability problems.
Possible causes– Voltage correlation issues between throttle/pedal position sensors ‘A’ and ‘C’
– Faulty sensors or wiring
– Sensor calibration issues
How to diagnose?– Compare voltage readings between sensors ‘A’ and ‘C’
– Test both sensors and check for faults
– Inspect wiring and connections

P2136 Meaning

The P2136 code indicates that there is a discrepancy in the voltage signals from throttle/pedal position sensors ‘A’ and ‘C’. These sensors are responsible for monitoring throttle or pedal positions and sending corresponding signals to the engine control module (ECM). When the signals don’t correlate properly, it can lead to throttle control issues, affecting acceleration and drivability.

Step-by-step diagnostic guide

ActionDescriptionTools Needed
Check for Other CodesUse an OBD-II scanner to check for additional codes that may provide more context or reveal related issues.OBD-II Scanner
Compare Voltage ReadingsUse a multimeter or diagnostic tool to measure and compare the voltage outputs from throttle/pedal position sensors ‘A’ and ‘C’. Ensure the readings are within the manufacturer’s specified range and correlate properly.Multimeter, Diagnostic Tool
Test Sensors for FaultsUse the diagnostic tool to test both sensors for proper functionality. Ensure there are no signal irregularities or faults in either sensor.Multimeter, Diagnostic Tool
Inspect Wiring and ConnectionsVisually inspect the wiring and connectors for both sensors ‘A’ and ‘C’ to check for any signs of damage, loose connections, or corrosion.Flashlight, Multimeter
Verify CalibrationEnsure that the sensors are calibrated correctly according to the manufacturer’s specifications. Recalibrate the sensors if necessary.Diagnostic Tool, Vehicle Manual
Clear the Code and Test DriveAfter performing repairs or adjustments, clear the code using an OBD-II scanner and take the vehicle for a test drive to verify that the issue is resolved.OBD-II Scanner
Recheck for CodesAfter the test drive, re-scan the vehicle to ensure the P2136 code has not returned.OBD-II Scanner
Bluetooth OBD-II scanners

OBD-II scanner Buyer’s Guide

  • Scanner features explained
  • Different types of scanners
  • Scanners for coding/odometer/ECU/checks
  • Best picks + discount codes

Download PDF FREE

    Leave a Comment