The P2031: Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 2 code indicates an issue with the exhaust gas temperature (EGT) sensor circuit located on Bank 1, Sensor 2. This could be due to a faulty sensor, wiring problems, or issues in the sensor’s circuit.
P2031 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P2031: Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 2 |
| Is it serious? | Yes, the EGT sensor is critical for monitoring and controlling the exhaust temperature, which impacts emissions and protects the catalytic converter and DPF. |
| Possible causes | – Faulty exhaust gas temperature sensor – Wiring or connector issues – Sensor circuit problems |
| How to diagnose? | – Test the exhaust gas temperature sensor – Inspect wiring and connectors – Check sensor circuit for issues |
P2031 Meaning
The P2031: Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 2 code refers to a malfunction in the EGT sensor circuit on Bank 1 (the side of the engine with cylinder 1), specifically the second sensor. This sensor monitors the temperature of the exhaust gases and helps protect components like the catalytic converter and DPF from damage caused by excessive heat.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional codes related to the exhaust system, such as those concerning the catalytic converter or DPF. These may help in diagnosing the issue. | OBD-II Scanner |
| Test the Exhaust Gas Temperature Sensor | Use a multimeter or diagnostic tool to test the resistance and operation of the exhaust gas temperature sensor on Bank 1, Sensor 2. Compare the readings to manufacturer specifications. | Multimeter, Diagnostic Tool |
| Inspect Wiring and Connectors | Visually inspect the wiring and connectors leading to the EGT sensor. Look for signs of damage, corrosion, or loose connections that could cause a fault in the sensor circuit. | Flashlight, Multimeter |
| Check Sensor Circuit Continuity | Perform a continuity test on the sensor circuit wiring to check for any shorts, breaks, or high resistance that may affect the signal sent from the sensor to the ECU. | Multimeter |
| Inspect the Exhaust System | Check the exhaust system near the sensor for damage, leaks, or blockages that could affect sensor readings. Ensure the sensor is not contaminated by soot or carbon buildup. | Flashlight, Exhaust Cleaner |
| Replace the Exhaust Gas Temperature Sensor | If the sensor is faulty or provides incorrect readings, replace it with a new one. Ensure it is properly installed to avoid further issues. | Replacement EGT Sensor, Wrench |
| Repair or Replace Damaged Wiring | If any wiring or connectors are damaged, corroded, or disconnected, repair or replace them to restore proper signal transmission to the sensor. | Wiring Repair Kit |
| Clear the Code and Test Drive | After completing the repairs, clear the P2031 code using an OBD-II scanner. Take the vehicle for a test drive to verify that the sensor is functioning properly and the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure that the P2031 code has not returned. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)