The P0C5E: Drive Motor ‘A’ Position Sensor Circuit ‘B’ Intermittent/Erratic refers to an issue where the position sensor for Drive Motor ‘A’ in Circuit ‘B’ is sending an intermittent or erratic signal. This can be caused by a faulty sensor, wiring problems, or circuit issues, leading to inconsistent motor position readings and affecting vehicle performance.
P0C5E – Quick Overview
| Code | Information |
|---|---|
| Meaning | P0C5E: Drive Motor ‘A’ Position Sensor Circuit ‘B’ Intermittent/Erratic |
| Is it serious? | Yes, an intermittent or erratic signal can lead to unstable motor control and affect the vehicle’s drive system performance. |
| Possible causes | – Intermittent sensor signal – Faulty position sensor – Wiring or circuit issues |
| How to diagnose? | – Monitor the sensor signal for intermittency – Test the sensor and circuit – Inspect wiring and connections |
P0C5E Meaning
The P0C5E: Drive Motor ‘A’ Position Sensor Circuit ‘B’ Intermittent/Erratic code indicates that the signal from the position sensor in Circuit ‘B’ is inconsistent or erratic. This can result in incorrect motor position readings, leading to unstable vehicle performance. The issue may stem from wiring problems, a faulty sensor, or circuit-related issues.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional related fault codes that may provide further insight into the issue. | OBD-II Scanner |
| Monitor the Sensor Signal for Intermittency | Use a diagnostic tool to monitor the sensor’s signal over time, checking for inconsistencies or erratic behavior. | Diagnostic Tool, Multimeter |
| Test the Sensor and Circuit | Test the sensor and its circuit for proper voltage and continuity, ensuring that there are no signal interruptions or fluctuations. | Multimeter, Diagnostic Tool |
| Inspect Wiring and Connections | Inspect the wiring and connections for damage, corrosion, or loose connections that could cause intermittent signals. Repair or replace as necessary. | Flashlight, Multimeter |
| Clear the Code and Test Drive | After repairs, clear the fault code and take the vehicle for a test drive to verify that the issue is resolved. | OBD-II Scanner |
| Recheck for Codes | Re-scan the vehicle after the test drive to ensure the P0C5E code has been cleared and does not return. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko