The P0BD4: Drive Motor Inverter Temperature Sensor “C” Circuit High fault code indicates that the voltage reading from the drive motor inverter temperature sensor “C” is higher than expected. This could be caused by a faulty sensor, wiring issues, or an electrical system problem, which may lead to inaccurate temperature readings and improper cooling of the drive motor inverter.
P0BD4 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P0BD4: Drive Motor Inverter Temperature Sensor “C” Circuit High |
| Is it serious? | Yes, high voltage can result in incorrect temperature readings, potentially causing overheating and damage to the drive motor inverter. |
| Possible causes | – High voltage reading from sensor “C” – Faulty sensor or wiring issue – Electrical system problem |
| How to diagnose? | – Measure voltage from sensor “C” – Test sensor functionality – Inspect electrical system |
P0BD4 Meaning
The P0BD4 code indicates that the voltage from the drive motor inverter temperature sensor “C” is higher than the expected range. This could lead to incorrect temperature monitoring of the drive motor inverter, potentially causing overheating if the system does not regulate the inverter cooling properly.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for other related codes that could provide further insights into the issue. | OBD-II Scanner |
| Measure Voltage from Sensor “C” | Use a multimeter to measure the voltage output from the temperature sensor “C”. Compare it with the manufacturer’s specifications to ensure it is within the correct range. | Multimeter |
| Test Sensor Functionality | Test the functionality of the sensor to ensure it is working properly. A faulty sensor may produce high voltage readings, leading to inaccurate temperature readings. | Diagnostic Tool, Multimeter |
| Inspect Wiring and Connections | Inspect the wiring and connections associated with the temperature sensor “C” for any signs of damage, corrosion, or loose connections that may result in high voltage readings. | Flashlight, Multimeter |
| Check for Electrical System Problems | Investigate potential electrical faults such as short circuits, blown fuses, or damaged relays that may be causing the high voltage issue. | Circuit Tester, Flashlight, Multimeter |
| Replace Faulty Sensor | If the sensor is found to be defective, replace it to ensure accurate temperature monitoring and avoid overheating. | Replacement Sensor |
| Clear Codes and Test Drive | After completing repairs, clear the fault codes using an OBD-II scanner and take the vehicle for a test drive to confirm that the issue has been resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure the P0BD4 code does not return. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko