Fix P0AE6: STEP-BY-STEP diagnostic GUIDE!

The P0AE6: Hybrid Battery Precharge Contactor Control Circuit Low refers to a situation where the voltage in the precharge contactor control circuit is lower than expected. This could be caused by a faulty contactor, a control module issue, or wiring faults, which can prevent the hybrid system from operating correctly.

P0AE6 – Quick Overview

CodeInformation
MeaningP0AE6: Hybrid Battery Precharge Contactor Control Circuit Low
Is it serious?Yes, this issue can prevent proper hybrid system operation.
Possible causes– Low voltage in precharge contactor control circuit
– Faulty contactor or control module
– Wiring issue
How to diagnose?– Measure voltage in precharge contactor control circuit
– Test contactor and control module functionality
– Inspect wiring for faults

P0AE6 Meaning

The P0AE6: Hybrid Battery Precharge Contactor Control Circuit Low fault code indicates that the control circuit for the hybrid battery’s precharge contactor is experiencing low voltage. This could be due to a malfunctioning contactor, control module, or damaged wiring, leading to improper electrical flow and preventing the hybrid system from charging or operating properly.

Step-by-step diagnostic guide

ActionDescriptionTools Needed
Check for Other CodesUse an OBD-II scanner to check for any related codes that might provide further insight into the issue.OBD-II Scanner
Measure Voltage in CircuitUse a multimeter to measure the voltage in the precharge contactor control circuit and compare it with the manufacturer’s specifications.Multimeter, Vehicle Service Manual
Test Contactor and Control ModuleUse a diagnostic tool to test the functionality of the precharge contactor and control module to ensure they are functioning correctly.Multimeter, Diagnostic Tool
Inspect Wiring for FaultsVisually inspect the wiring for any signs of damage, corrosion, or disconnection that could be causing low voltage in the control circuit.Flashlight, Multimeter
Repair or Replace ComponentsRepair or replace any faulty wiring, contactor, or control module as necessary to restore normal voltage and function.Repair Tools, Replacement Parts
Clear the Code and Test DriveAfter repairs are made, clear the fault code using an OBD-II scanner and perform a test drive to ensure the issue is resolved.OBD-II Scanner
Recheck for CodesRe-scan the vehicle after the test drive to confirm that the P0AE6 code does not return.OBD-II Scanner
Bluetooth OBD-II scanners

OBD-II scanner Buyer’s Guide

  • Scanner features explained
  • Different types of scanners
  • Scanners for coding/odometer/ECU/checks
  • Best picks + discount codes

Download PDF FREE

    Leave a Comment