The P0752: Shift Solenoid A Stuck On refers to an issue where shift solenoid “A” is stuck in the “on” position, preventing the proper regulation of transmission fluid flow for gear shifting. This can lead to improper or erratic shifting. The problem is commonly caused by a faulty solenoid, wiring issues, or connector problems.
P0752 – Quick Overview
| Code | Information |
|---|---|
| Meaning | P0752: Shift Solenoid A Stuck On |
| Is it serious? | Yes, this can cause improper shifting, leading to drivability issues and possible transmission damage. |
| Possible causes | – Shift solenoid A stuck on – Faulty solenoid – Wiring or connector issues |
| How to diagnose? | – Test solenoid A for stuck-on condition – Inspect wiring and connectors – Replace faulty solenoid if necessary |
P0752 Meaning
The P0752 code indicates that shift solenoid “A” is stuck in the “on” position, which means the solenoid is continuously allowing transmission fluid to flow. This can cause the transmission to stay in one gear or result in erratic shifting. The cause could be a faulty solenoid, damaged wiring, or connector issues.
Step-by-step diagnostic guide
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check for additional transmission-related codes that may help diagnose the issue. | OBD-II Scanner |
| Test Solenoid A for Stuck-On Condition | Use a multimeter or diagnostic scanner to test solenoid A for electrical functionality and verify if it is stuck in the “on” position. | Multimeter, Diagnostic Scanner |
| Inspect Wiring and Connectors | Inspect the wiring and connectors leading to solenoid A for signs of damage, wear, or loose connections that could cause the solenoid to stay on. | Flashlight, Multimeter, Safety Gloves |
| Check Transmission Fluid | Ensure the transmission fluid level is correct and the fluid is clean. Contaminated or low fluid can affect solenoid performance. | Transmission Fluid Tester, Dipstick |
| Replace Faulty Solenoid | If solenoid A is found to be stuck on or malfunctioning, replace it with a new solenoid according to manufacturer specifications. | Replacement Parts, Wrenches, Screwdrivers |
| Clear the Code and Test Drive | After replacing the solenoid, clear the code using an OBD-II scanner and take the vehicle for a test drive to confirm the issue is resolved. | OBD-II Scanner |
| Recheck for Codes | After the test drive, rescan the vehicle to ensure that the P0752 code has not returned. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko