The P0489: Exhaust Gas Recirculation ‘A’ Control Circuit Low refers to an issue within the EGR (Exhaust Gas Recirculation) control circuit, which has a low voltage supply. This could be due to a fault in the circuit itself, low input voltage, or wiring issues. When this code appears, it suggests that there is a malfunction in the system responsible for controlling exhaust gas recirculation, which can affect the engine’s emission control and performance.
P0489 – Quick Overview
| Meaning | P0489: Exhaust Gas Recirculation ‘A’ Control Circuit Low |
| Is it serious? | Yes, this code can cause performance issues and elevated emissions levels, which could impact engine efficiency. |
| Possible causes | – Faulty EGR control circuit – Low voltage supply – Wiring issues |
| How to diagnose? | – Test the EGR control circuit for low input – Check voltage supply to the circuit – Inspect wiring for faults |
P0489 Meaning
The P0489: Exhaust Gas Recirculation ‘A’ Control Circuit Low means there is a problem in the circuit that controls the exhaust gas recirculation (EGR) system. This can result in inefficient exhaust gas control, leading to increased emissions and potential engine performance issues. A wiring fault, low voltage supply, or a problem with the EGR circuit can all contribute to this error.
Step-by-step diagnostic guide
Follow the outlined procedure to diagnose this DTC by eliminating possible causes one by one.
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check if there are any other related codes present. These might give additional clues about the problem. | OBD-II Scanner |
| Inspect the EGR Control Circuit | Visually inspect the EGR control circuit for any signs of damage, corrosion, or disconnection. Ensure it is securely attached. | Flashlight, Safety Gloves |
| Test the EGR Control Circuit | Using a multimeter, test the EGR circuit for low voltage. Compare the readings to the manufacturer’s specifications. | Multimeter, Manufacturer’s Specifications |
| Inspect Wiring and Connectors | Carefully check the wiring and connectors leading to the EGR control circuit for any signs of wear, corrosion, or breaks. Look for loose or disconnected wires. | Flashlight, Multimeter |
| Repair or Replace Damaged Wiring/Connectors | If any wiring or connectors are damaged or corroded, repair or replace them. Ensure connections are secure and free from dirt or corrosion. | Wire Strippers, Electrical Tape, Replacement Wires/Connectors |
| Check Voltage Supply | Verify that the voltage supply to the EGR circuit is within the correct range, as low input can trigger this fault code. | Multimeter |
| Clear the Code and Test Drive | After completing the necessary repairs, clear the P0489 code using the OBD-II scanner. Take the vehicle for a test drive to ensure the issue is resolved and the code does not return. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure the P0489 code has not reappeared. If the code returns, further diagnosis may be required. | OBD-II Scanner |
Free PDF: How to choose OBD2 scanner
I’ve made you a free PDF to choose the OBD2 scanner in 5 minutes.
✅ Which OBD2 scanner is best?
✅ Which type should you get (DIY, Pro, Hobby)
✅ What is the best scanner for the exact brand/feature (e.g best for BMW)
✅ How to get a Bi-Directional tool for as cheap as $40
✅ Discount coupons for scanners
PDF is 100% free and it is designed to help you pick a scanner in less than a few minutes! Not a boring 50-page guide.
Just tell me where to send it.
Hi, I am Juraj “Yuri” Lukacko. I got frustrated by unhelpful and scammy mechanics, so I decided to learn everything about car diagnostics myself. I test dozens of new car diagnostic tools every month along with learning new strategies to fix and customize cars. About Juraj Lukacko (Yuri)