The P0247: Turbocharger Wastegate Solenoid B Malfunction code indicates an issue with the wastegate solenoid B in the turbocharger system. This solenoid controls the wastegate, which regulates the amount of exhaust gas that bypasses the turbocharger, thus controlling the boost pressure. A malfunction in this solenoid can result in improper turbocharger operation, leading to engine performance problems. The cause could be a faulty solenoid, wiring issues, or a problem with the Powertrain Control Module (PCM).
P0247 – Quick Overview
| Meaning | P0247: Turbocharger Wastegate Solenoid B Malfunction |
| Is it serious? | Yes, this code can be serious as it may cause improper turbocharger operation, leading to reduced engine performance or potential engine damage. |
| Possible causes | – Faulty wastegate solenoid B – Wiring issues such as shorts or opens – Solenoid connector problems – Faulty PCM |
| How to diagnose? | – Inspect the wastegate solenoid B for proper operation. – Check wiring and connections for continuity. – Test the solenoid using a scan tool. – Replace or repair any faulty components. |
P0247 Meaning
The P0247: Turbocharger Wastegate Solenoid B Malfunction code indicates that there is an issue with the wastegate solenoid B in the turbocharger system. This solenoid is critical for managing the turbocharger’s boost pressure by controlling the wastegate. If it malfunctions, it could lead to incorrect boost pressure levels, causing engine performance issues or even damage.
Step-by-step diagnostic guide
Follow the outlined procedure to diagnose this DTC by eliminating possible causes one by one.
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check if there are any other related codes present. These might give additional clues about the problem. | OBD-II Scanner |
| Inspect the Wastegate Solenoid B | Visually inspect the wastegate solenoid B for any signs of damage, corrosion, or disconnection. Ensure it is securely attached and functioning properly. | Flashlight, Safety Gloves |
| Test the Solenoid Using a Scan Tool | Use a scan tool to monitor the operation of the wastegate solenoid B. Compare its performance against manufacturer specifications to check if it is functioning correctly. | Scan Tool, Manufacturer’s Specifications |
| Inspect Wiring and Connectors | Carefully check the wiring and connectors leading to the wastegate solenoid B for any signs of wear, corrosion, or breaks. Look for loose or disconnected wires that could cause malfunction. | Flashlight, Multimeter |
| Repair or Replace Damaged Wiring/Connectors | If any wiring or connectors are damaged, shorted, or corroded, repair or replace them. Ensure all connections are secure and free from contaminants. | Wire Strippers, Electrical Tape, Replacement Wires/Connectors |
| Check the PCM (Powertrain Control Module) | Inspect the PCM and its connections for any signs of damage or loose connections. If the PCM is suspected to be faulty and causing the malfunction, it may need reprogramming or replacement. | OBD-II Scanner, Multimeter |
| Clear the Code and Test Drive | After completing the necessary repairs, clear the P0247 code using the OBD-II scanner. Take the vehicle for a test drive to ensure the issue is resolved and the code does not return. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure the P0247 code has not reappeared. If the code returns, further diagnosis may be required. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko