Fix P0241: STEP-BY-STEP diagnostic GUIDE!

The P0241: Turbocharger Boost Sensor B Circuit Low refers to an issue where the voltage in the turbocharger boost sensor B circuit is lower than expected. This problem can be caused by a faulty sensor, wiring issues, or a malfunction in the Powertrain Control Module (PCM). When this code is triggered, it indicates that the sensor is not receiving or sending the correct voltage, which could impact the turbocharger’s ability to properly manage boost pressure.

P0241 – Quick Overview

MeaningP0241: Turbocharger Boost Sensor B Circuit Low
Is it serious?Yes, this code can be serious as low voltage in the sensor circuit may lead to incorrect boost pressure readings, affecting engine performance and potentially causing damage.
Possible causes– Low voltage in the turbocharger boost sensor B circuit
– Faulty turbocharger boost sensor B
– Wiring or connector issues
– Faulty PCM
How to diagnose?– Measure the voltage in the turbocharger boost sensor B circuit.
– Inspect the sensor for proper operation.
– Check wiring and connectors for defects.
– Replace or repair any faulty components.

P0241 Meaning

The P0241: Turbocharger Boost Sensor B Circuit Low code indicates that the voltage in the circuit for the turbocharger boost sensor B is lower than it should be. This could be due to issues with the sensor itself, the wiring or connectors, or the vehicle’s PCM. When this code is triggered, it suggests that the turbocharger’s boost pressure is not being monitored accurately, which can affect the vehicle’s performance and efficiency.

Step-by-step diagnostic guide

Follow the outlined procedure to diagnose this DTC by eliminating possible causes one by one.

ActionDescriptionTools Needed
Check for Other CodesUse an OBD-II scanner to check if there are any other related codes present. These might give additional clues about the problem.OBD-II Scanner
Inspect the Turbocharger Boost Sensor BVisually inspect the turbocharger boost sensor B for any signs of damage, corrosion, or disconnection. Ensure it is securely attached and functioning properly.Flashlight, Safety Gloves
Measure Voltage in the CircuitUse a multimeter to measure the voltage in the turbocharger boost sensor B circuit. Compare the readings to the manufacturer’s specifications to determine if the voltage is too low.Multimeter, Manufacturer’s Specifications
Inspect Wiring and ConnectorsCarefully check the wiring and connectors leading to the turbocharger boost sensor B for any signs of wear, corrosion, or breaks. Look for loose or disconnected wires that could cause low voltage.Flashlight, Multimeter
Repair or Replace Damaged Wiring/ConnectorsIf any wiring or connectors are damaged, shorted, or corroded, repair or replace them. Ensure all connections are secure and free from contaminants.Wire Strippers, Electrical Tape, Replacement Wires/Connectors
Check the PCM (Powertrain Control Module)Inspect the PCM and its connections for any signs of damage or loose connections. If the PCM is suspected to be faulty and causing low voltage, it may need reprogramming or replacement.OBD-II Scanner, Multimeter
Clear the Code and Test DriveAfter completing the necessary repairs, clear the P0241 code using the OBD-II scanner. Take the vehicle for a test drive to ensure the issue is resolved and the code does not return.OBD-II Scanner, Vehicle Owner’s Manual
Recheck for CodesAfter the test drive, re-scan the vehicle to ensure the P0241 code has not reappeared. If the code returns, further diagnosis may be required.OBD-II Scanner
Bluetooth OBD-II scanners

OBD-II scanner Buyer’s Guide

  • Scanner features explained
  • Different types of scanners
  • Scanners for coding/odometer/ECU/checks
  • Best picks + discount codes

Download PDF FREE

    Leave a Comment