The P0226: Throttle/Pedal Position Sensor/Switch C Circuit Range/Performance refers to a problem within the throttle or pedal position sensor C circuit, which can cause issues with the vehicle’s throttle response and acceleration. This problem can be caused by a faulty sensor, circuit performance issues, wiring or connector problems, or a malfunction in the Powertrain Control Module (PCM). When this code appears, it indicates that the throttle or pedal position sensor C is not operating within the expected range, which can affect the vehicle’s drivability.
P0226 – Quick Overview
| Meaning | P0226: Throttle/Pedal Position Sensor/Switch C Circuit Range/Performance |
| Is it serious? | Yes, this code can be serious as it can lead to poor throttle response and potential safety issues. Prompt diagnosis is recommended. |
| Possible causes | – Faulty throttle/pedal position sensor C – Sensor circuit range/performance issues – Wiring or connector problems – Faulty PCM |
| How to diagnose? | – Test the throttle/pedal position sensor C for proper operation. – Inspect the sensor circuit for range/performance issues. – Check the wiring and connectors for defects. – Replace or repair any faulty components. |
P0226 Meaning
The P0226: Throttle/Pedal Position Sensor/Switch C Circuit Range/Performance code means that the vehicle’s computer has detected an issue with the signal coming from the throttle or pedal position sensor C. This could be due to a faulty sensor, issues with the sensor’s circuit, or problems with the wiring or connectors. When this code is triggered, it indicates that the sensor is not operating within its expected range, which can affect the throttle response and overall drivability of the vehicle.
Step-by-step diagnostic guide
Follow the outlined procedure to diagnose this DTC by eliminating possible causes one by one.
| Action | Description | Tools Needed |
|---|---|---|
| Check for Other Codes | Use an OBD-II scanner to check if there are any other related codes present. These might give additional clues about the problem. | OBD-II Scanner |
| Test Throttle/Pedal Position Sensor C | Test the operation of the throttle/pedal position sensor C to ensure it is working correctly. Use manufacturer specifications to compare the results. | Multimeter, Manufacturer’s Specifications |
| Inspect Sensor Circuit | Inspect the circuit for the throttle/pedal position sensor C for any range/performance issues. Ensure that the circuit is operating within the specified range. | Multimeter, Circuit Tester |
| Check Wiring and Connectors | Carefully inspect the wiring and connectors related to the throttle/pedal position sensor C for any signs of wear, corrosion, or damage. | Flashlight, Multimeter |
| Inspect the PCM | If no issues are found with the sensor, circuit, or wiring, inspect the Powertrain Control Module for faults or connectivity issues. Reprogram or replace if necessary. | OBD-II Scanner, Multimeter |
| Repair or Replace Faulty Components | If any components are found to be faulty during the inspection, repair or replace them to restore proper function. | Replacement Parts, Basic Hand Tools |
| Clear the Code and Test Drive | After completing repairs, clear the P0226 code using the OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved. | OBD-II Scanner, Vehicle Owner’s Manual |
| Recheck for Codes | After the test drive, re-scan the vehicle to ensure the P0226 code has not reappeared. If the code returns, further diagnosis may be required. | OBD-II Scanner |
OBD-II scanner Buyer’s Guide
- Scanner features explained
- Different types of scanners
- Scanners for coding/odometer/ECU/checks
- Best picks + discount codes
I test OBD-II scanners and make DIY Engine diagnostics guides to help you solve your car problems without having to depend on the mechanic. A lot of them will try to scam you or are just no help at all. About Juraj Lukacko